Nikon CM200 service manual CPS Programming/Flashing Setup Ribless

4-2 RADIO TUNING AND PROGRAMMING

3.0CPS Programming/Flashing Setup Ribless

The CPS programming setup, shown in Figure 4-2 is used to program and flash the radio using the Radio front Telco connector.

FKN8096

Data =Programming

Boot = Flashing

8-pin Telco

FKN8096

10-pin Telco

Radio

ACC DC RF

Power Supply

Ribless Programming Cable RKN4081		Tx Data
		Rx Data
		Gnd
	DB25

Figure 4-2CPS Programming/Flashing Setup Cable with Internal RIB

4.0CPS Programming Setup with RIB (with Telco Connector)

The CPS programming setup, shown in Figure 4-3 is used to program the radio using the Radio front Telco connector.

Radio

ACC

DC

RF

Power Supply

Programming

Cable

GTF374

DB25

		DB15
RIB			Tx Data
RLN-4008			Rx Data
			Gnd
	Cable 3080369B72 (9 PIN)
	Cable 3080369B71 (25 PIN)

Figure 4-3CPS Programming Setup with RIB