Nikon CM200 service manual Test Name Communications Analyzer Radio Test Set Comment, Test Mode

RF Test Mode 3-3

Table 3-3Test Channel Spacing

	Number of Beeps		Channel Spacing
	1		25 kHz
	2		12.5 kHz
	3		20 kHz
	Table 3-4Test Frequencies
		VHF	VHF	UHF	UHF
Channel Display	Test Channel	(136-162	(146-174	(438-470	(465-495
		MHz)	MHz)	MHz)	MHz)
1 Low Power	TX#1 or #8	136.125	146.025	438.025	465.225
8 High Power	RX#1 or #8
2 Low Power	TX#2 or #9	140.275	150.700	443.300	470.225
9 High Power	RX#2 or #9
3 Low Power	TX#3 or #10	144.675	155.300	448.700	475.225
10* High Power	RX#3 or #10
4 Low Power	TX#4 or #11	149.125	160.000	454.000	480.225
11* High Power	RX#4 or #11
5 Low Power	TX#5 or #12	153.475	164.700	459.300	485.225
12* High Power	RX#5 or #12
6 Low Power	TX#6 or #13	157.775	169.300	464.700	490.225
13* High Power	RX#6 or #13
7 Low Power	TX#7 or #14	161.775	173.025	469.025	494.775
14* High Power	RX#7 or #14

*The CM200 displays only the 2nd digit and the high power indicator is illuminated.

Table 3-5Transmitter Performance Checks

Test Name	Communications Analyzer	Radio	Test Set	Comment
Reference	Mode: PWR MON	TEST MODE,	PTT to	Frequency error to
Frequency	4th channel test frequency*	Test Channel 4	continuous	be: ±186 Hz VHF1
	Monitor: Frequency error	carrier squelch	(during the	±200 Hz VHF2
	Input at RF In/Out		performance	±568 Hz UHF2
			check)	±600 Hz UHF3
Power RF	As above	As above	As above	1-25 W