Nikon Nikon COOLPIX S4200 manual Connecting the Camera to a Printer, Turn off the camera, E30

Connecting the Camera to a Printer (Direct Print)

Connecting the Camera to a Printer

1Turn off the camera.

Reference Section

2Turn on the printer.

• Check printer settings.

3Connect the camera to the printer using the included USB cable.

•Be sure that plugs are properly oriented. Do not attempt to insert plugs at an angle, and do not use force when connecting or disconnecting the plugs.

4The camera is automatically turned on.

• When properly connected, the PictBridge startup screen (1) will be displayed in the camera monitor, followed by the image selection screen (2).

1 2 15 / 05 / 2012 4 / 4

BIf the PictBridge Startup Screen Is not Displayed

Turn the camera off and disconnect the USB cable. Set the Charge by computer option (E78) in the camera’s setup menu to Off, then connect the camera again.

E30