Nikon Nikon COOLPIX S4200 manual F12

Troubleshooting

	Problem		Cause/Solution	A
		•	The desired image was sorted into a category	72, E9
		•	other than the category currently displayed.
			Images recorded by a camera other than the	75, E60
			COOLPIX S4200 and images copied using the
			Copy option cannot be displayed in auto sort
	The recorded images	•	mode.
	are not displayed in auto		Images recorded in the internal memory or on	–
	sort mode.		the memory card may not be played back
		•	correctly if overwritten by a computer.
			Up to 999 images or movies in total can be	E10
			added to each category. If the desired category
			already contains 999 images or movies in total,
			new images or movies cannot be added.
		•	Camera is off.	23
		•	Battery is exhausted.	22
		•	USB cable is not correctly connected.	76, 79
	Nikon Transfer 2 does	•	Camera is not recognized by the computer.	–
	not start when camera is	•	Confirm system requirements.	77
	connected.	•	Computer is not set to start Nikon Transfer 2	80
			automatically. For more information on
			Nikon Transfer 2, refer to help information
			contained in ViewNX 2.
Technical	screen is not displayed	With some PictBridge-compatible printers, the
		PictBridge startup screen may not be displayed and
	The PictBridge startup
		it may be impossible to print images when Auto is
Notes	when the camera is	selected for the Charge by computer option in		90, E78
		the setup menu. Set the Charge by computer
	connected to a printer.
		option to Off and reconnect the camera to the
and
		printer.
Index
		•	Memory card contains no images. Replace the	20
	Images to be printed are	•	memory card.
	not displayed.		Remove the memory card to print images from	21
			the internal memory.
		Paper size cannot be selected from the camera in
		the following situations, even when printing from a
	Cannot select paper size	PictBridge-compatible printer. Select paper size
		from the printer.
	with camera.
		•	The printer does not support the paper size	E31,
		•	specified by the camera.	E32
			The printer automatically selects the paper size.	–

F12