Nikon Nikon COOLPIX S4200 manual Eye-Fi Upload, E82, Eye-Fi communication indicator

The Setup Menu

bEye-Fi Upload

Tap the dtab MTap z (Setup menu) MbEye-Fi upload

Option	Description
Enable	Upload images created by the camera to a preselected
	destination.
Disable	Images will not be uploaded.
(default setting)

Reference Section

BNotes About Eye-Fi Cards

•Note that images will not be uploaded if signal strength is insufficient even if Enable is selected.

•Select Disable where wireless devices are prohibited.

•Refer to the instruction manual of your Eye-Fi card for more information. In the event of malfunction, contact the card manufacturer.

•The camera can be used to turn Eye-Fi cards on and off, but may not support other Eye-Fi functions.

•The camera is not compatible with the endless memory function. When it is set on a computer, disable the function. If the endless memory function is enabled, the number of pictures taken may not be displayed correctly.

•Eye-Fi cards are for use only in the country of purchase. Observe all local laws concerning wireless devices.

•Leaving the setting as Enable will result in the battery being depleted in a shorter period of time.

CEye-Fi communication indicator

The communication status of the Eye-Fi card in the camera can be confirmed on the monitor (A6).

•w: Eye-Fi upload is set to Disable.

•x (lights): Eye-Fi upload enabled; waiting to begin upload.

•x (flashes): Eye-Fi upload enabled; uploading data.

•y: Eye-Fi upload enabled but no images available for upload.

•z: An error occurred. The camera cannot control the Eye-Fi card.

CSupported Eye-Fi Cards

As of November 2011, the following Eye-Fi cards can be used. Be sure that the Eye-Fi card firmware has been updated to the latest version.

•Eye-Fi Connect X2 SDHC 4GB

•Eye-Fi Mobile X2 SDHC 8GB

•Eye-Fi Pro X2 SDHC 8GB

E82