Nikon S4200 manual Daylight Saving Time, Changing the Language or the Date and Time Setting

Step 1 Turn the Camera On

6Tap Yes.

•The settings are applied, the lens extends, and the camera enters shooting mode.

Date and time
OK?
Yes	No

Daylight Saving Time

If daylight saving time is in effect, tap p in the time zone selection screen displayed in step 3 to turn on the daylight saving time option.

•When the daylight saving time option is enabled, Wis displayed

at the top of the monitor. To turn off the daylight saving time option, tap p again.

Home time zone

Basic Steps for

CChanging the Language or the Date and Time Setting

•You can change these settings using the Language and Time zone and date settings in the setup menu (A88).

•You can enable or disable daylight saving time by selecting Time zone and date and then Time zone in the setup menu. When enabled, the clock moves forward one hour; when disabled, the clock moves back one hour. When the travel destination (x) is selected, the time difference between the travel destination and the home time zone (w) is automatically calculated and the date and time in the selected region are saved at the time of shooting.

•If you exit without setting the date and time, Owill flash when the shooting screen is displayed. Use the Time zone and date setting in the setup menu to set the date and time.

CThe Clock Battery

•The camera clock is powered by the backup battery that is separate from the camera’s main battery.

•The backup battery charges when the main battery is inserted into the camera or when the camera is connected to an optional AC adapter, and can provide several days of backup power after about ten hours of charging.

•If the backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again. See “Setting the Display Language, Date and Time” (step 2, A24) for more information.

Shooting and Playback

CImprinting the Shooting Date in Printed Images

• Set the date and time before shooting.

• You can permanently imprint the shooting date on images as they are taken by setting Print date in the setup menu (A88).

• If you want the shooting date to be printed without using the Print date setting, print using the ViewNX 2 software (A77).

25