Nikon S4200 Auto info is selected for Photo info in Monitor, Print date not, Support Print date

		Troubleshooting
Problem		Cause/Solution	A
	•	Camera is off.	23
	•	Standby mode for saving power: press the	23, E75
		power switch, the shutter-release button,
		A button, c button, or b(emovie-record)
	•	button.
Monitor is blank.		When flash lamp flashes, wait until flash has	55
	•	charged.
		Camera and computer are connected via USB	76, 79
	•	cable.
		Camera and TV are connected via audio/video	76, E27
		cable.
Monitor is hard to read.	•	Adjust monitor brightness.	88, E68
	•	Monitor is dirty. Clean monitor.	F5
	•	If camera clock has not been set, “Date not set”	24, E65
		indicator flashes during shooting and movie
		recording. Images and movies recorded before
		clock is set are dated “00/00/0000 00:00” or “01/
Date and time of		01/2012 00:00” respectively. Set the correct time
recording are not		and date from the Time zone and date option
correct.	•	in the setup menu.
		The camera clock is not as accurate as ordinary	25, E65
		watches or clocks. Periodically compare the time
in monitor.		of the camera clock with that of a more accurate		Technical
	settings in the setup menu.
		timepiece and reset as required.
No indicators displayed	Auto info is selected for Photo info in Monitor		88, E68
				Notes
Print date not	Camera clock has not been set.		24, E65
available.				and
Date not appearing on	•	The current shooting mode is one that does not
				Index
images even when	•	support Print date.	88, E70
Print date is enabled.		Date cannot be imprinted on movies.
Time zone and date
setting screen appears	Clock battery is exhausted; all settings were
when the camera is			24, 25
	restored to their default values.
turned on.
Camera settings reset.
	Battery temperature is high. Turn off camera and
Monitor turns off, and	allow battery to cool down before resuming use.
the power-on lamp	After the lamp flashes for three minutes, the		23
flashes quickly.	camera will turn off automatically. Pressing the
	power switch also turns off the camera.

F7