Nikon CT1A01(11), COOLPIXS9100BLK user manual Press the shutter-release button to take a picture

Changing A(Auto) Mode Settings (Shooting Menu)

4Press the shutter-release button to take a picture.

The camera focuses on the focus area when the shutter- release button is pressed halfway. The focus area will glow green and focus will be locked.

When the camera is unable to focus, the focus area will blink. Press the shutter-release button halfway again to focus.

1 / 2 5 0 F 3.5

If the shutter-release button is pressed halfway while the focus area is not displayed, the camera focuses on the subject at the center of the frame.

Press the shutter-release button all the way down to release the shutter.

More on Shooting

BNotes on Subject Tracking

•Digital zoom is not available.

•Adjust zoom position, flash mode, exposure compensation, and menu settings prior to registering the subject. If any camera setting is changed after the subject has been registered, subject registration will be canceled.

•It may be impossible to register the desired subject, or the camera may be unable to track the registered subject or may begin tracking a different subject, if the subject is moving rapidly, if there is a significant amount of camera shake, or if the camera detects a similar subject. The camera’s ability to accurately track the registered subject is also dependent upon the size and brightness of the subject.

•When using autofocus and shooting subjects that are difficult to focus on (A29), the subject

may not be in focus even though the focus area glows green. If the subject is not in focus, change AF area mode (A53) to Manual or Center in A (auto) mode, and try focus lock shooting (A55) by focusing on another subject that is the same distance from the camera.

•There may be functions with which this setting cannot be enabled. See “Camera Settings that

Cannot Be Applied Simultaneously” (A87) for more information. 59