Nikon COOLPIXS9100BLK, COOLPIXS9100RED, CT1A01(11) user manual Error Messages, 200

Error Messages

The following table lists the error messages and other warnings displayed in the monitor, as well as the solutions for dealing with them.

	Display	Problem	Solution	A
	O(blinks)	Clock not set.	Set date and time.	172
	N	Battery exhausted.	Charge or replace the battery.	14, 16
	Battery exhausted.
			Turn off camera, and allow
			battery to cool down before
			resuming use. After five
			seconds, this message will
	P		disappear, the monitor will
		Battery temperature is	turn off, and the power-on
	Battery temperature			19
		high.	lamp will blink rapidly. After
	high
			the lamp blinks for three
			minutes, the camera will turn
			off automatically. Pressing the
			power switch also turns off
			the camera.
			The camera turns off
	P	Memory card or inside	automatically. Leave the
	The camera will turn		camera off until the memory
		of camera has become		–
	off to prevent		card or the inside of the
		hot.
	overheating.		camera has cooled and then
Technical		Camera cannot focus.		55
	Q(● blinks red)		• Use focus lock.
			turn it on again.
			• Refocus.	28, 29
Notes
	P	Camera cannot perform	Wait until message clears
	Please wait for the
and		other operations until	from display automatically	–
	camera to finish
		saving is complete.	when saving is complete.
Index	recording.
	u	Write-protect switch is	Slide write-protect switch to
	Memory card is write			23
		in “lock” position.	“write” position.
	protected.
	P		• Use approved card.	198
	This card cannot be
			• Check that terminals are	22
	used.	Error accessing memory
		card.	clean.
	P
			• Confirm that memory card	22
	This card cannot be		is correctly inserted.
	read.

200