Nilfisk-ALTO SR1800C B-D Instructions For Use, Without headlights See Fig. J, Controls and levers

USER MANUAL

Without headlights (See Fig. J)

1.Main broom control lever

2.Hopper control lever

3.Skirt control lever

4.Accelerator lever

5.Parking brake lever

6.Ignition switch

7.Horn switch

8.Hopper overheating buzzer (optional)

9.Fan control lever

10.Filter shaker switch

11.Brake pedal

12.Drive pedal

13.Warning light instrument panel

13a. Glow plug warning light

13b. Fuel warning light

13c. Battery charge indicator light

13d. Oil pressure warning light

13e. Coolant temperature warning light

13f. Engaged parking brake warning light

13g. High beam indicator light

13h. Running light indicator light

13i. Clogged air cleaner warning light

13j. Turn signal indicator light

13k. Hour counter

14.Fuse box B

15.Fuse box A

16.Optional switch

17.Side broom control lever

SR 1800C B With headlights (See Fig. K)

1.Main broom control lever

2.Hopper control lever

3.Skirt control lever

4.Battery plug

5.Parking brake lever

6.Ignition switch

7.Warning switch

8.Combination switch

9.Fan control lever

10.Filter shaker switch

11.Brake pedal

12.Drive pedal

13.Warning light instrument panel

14.Fuse box B

15.Fuse box A

16.Optional switch

17.Side broom control lever

18.Hopper overheating buzzer (optional)

Without headlights (See Fig. L)

1.Main broom control lever

2.Hopper control lever

3.Skirt control lever

4.Battery plug

5.Parking brake lever

6.Ignition switch

7.Horn switch

8.Hopper overheating buzzer (optional)

9.Fan control lever

10.Filter shaker switch

11.Brake pedal

12.Drive pedal

13.Warning light instrument panel

14.Fuse box B

15.Fuse box A

16.Optional switch

17.Side broom control lever

Controls and levers

The control levers are used for the following functions:

–Side broom lifting;

–Hopper lowering;

–Hopper lifting;

–Side broom lowering;

–Skirt opening;

–Skirt closing;

–Main broom lowering;

–Main broom lifting.

INSTRUCTIONS FOR USE

Start (SR 1800C D)

NOTE

Machines with the EC marking are provided with safety devices should the operator leave the driver’s seat.

The machine cannot be started unless the operator is sitting in position.

–Before starting the machine, make sure the parking brake (5, Fig. I) is engaged.

–Insert the ignition key in the ignition switch.

–Turn the accelerator lever (4, Fig. I) to idle.

–Turn the ignition key clockwise to the first position. Battery charge and oil pressure warning lights should be on.

–The glow-plug pre-heating warning light goes off: Turn the ignition key clockwise until the end of stroke. When the motor is on, release the ignition key which will automatically return to the first position.

NOTE

Before trying to start the machine again, turn the ignition key back to “0” position.

As soon as the machine has been started, check the battery charge, oil pressure and pre-heating warning lights are off.

10 33014817(2)2006-06 A