Nilfisk-ALTO SR 1700 2WD B Environmental Conditions, Noise Level, Controls And Instruments

USER MANUAL

ENVIRONMENTAL CONDITIONS

Working

The machine should only be used in a suitable environment. The work environment should be well-lit, should present no danger of explosions and should be protected from bad weather conditions.

The machine functions correctly within the following environmental conditions:

Temperature: +10°C ÷ +40°C.

Humidity: 30% ÷ 95% non-condensed.

Storage

When not in use, the machine should be stored indoor and protected from bad weather conditions.

Temperature: +1°C ÷ +50°C.

Humidity: maximum 95% non-condensed.

NOISE LEVEL

The noise level at the driver's seat, measured at 10 cm from the operator's left ear when the sweeper is moving, is 81.2 dB(A), with a maximum peak of 93.4 dB(C).

If the machine is used according to the instructions, the vibrations do not cause dangerous situations.

The machine vibration level is below 2.5 m/s².

USE

WARNING!

The machine should be used ONLY by qualified personnel who know all the machine controls.

NOTE

Before starting the machine, check the seat sensor operation: without the operator, the engine should immediately stop.

CONTROLS AND INSTRUMENTS

Driver's seat

Without headlights (See Fig. H)

1.Joystick

2.Hopper overheating buzzer (optional)

3.Fuse board

4.Battery plug

5.Parking brake lever

6.Ignition switch

7.Warning light instrument panel

8.Drive pedal

9.Suction fan switch

10.Horn switch

11.Brake pedal

12.Water pump switch (optional)

With headlights (See Fig. I)

1.Joystick

2.Hopper overheating buzzer (optional)

3.Fuse board

4.Battery plug

5.Parking brake lever

6.Ignition switch

7.Warning light instrument panel

8.Drive pedal

9.Suction fan switch

10.Warning switch

11.Brake pedal

12.Combination switch

13.Water pump switch (optional)

8 33014816(1)2005-07 A