USER MANUAL

MACHINE DESCRIPTION

Standard machine description (See Fig. F)

1.Seat

2.Steering wheel

3.Frame

4.Bumpers

5.Hopper hood

6.Hopper

7.Right side lid

8.Seat supporting hood

9.Left side lid

10.Engine hood

11.Right side broom

12.Rear axle

Description of the machine with cab (See Fig. G)

1.Seat

2.Steering wheel

3.Frame

4.Bumpers

5.Hopper hood

6.Hopper

7.Right side lid

8.Seat supporting hood

9.Left side lid

10.Engine hood

11.Right side broom

12.Rear axle

13.Cab

Frame

Rigid, composite supporting frame on rectangular plan, consisting of electrically welded steel plates.

The mechanical components of the machine are suitably sized, according to a 1.4÷1.5 factor, to withstand the dynamic stress due to the machine operation (supporting frame, hubs, axles, hopper supporting and lifting system, etc.).

Hopper

The hopper is fitted on the front side of the machine and connected to the frame by means of a hinge.

A hydraulic cylinder lifts and overturns the hopper when the waste is to be dumped at a height. The lower part has a hinged skirt, operated by a hydraulic cylinder, which closes the hopper while the waste is being dumped. The front side has two fans operated by a motor. These fans create a vacuum inside the hopper and in the main broom compartment. Inside it, there is a polyester closed pocket filter connected to an electric filter shaker.

On the front right side there is a side broom whose rotation is operated by a hydraulic motor, while its lifting and lowering are operated by a hydraulic cylinder.

It is possible to install a side broom on the left side as well and a third broom for corner cleaning.

Main broom

It consists of a sweeping roller whose rotation is operated by a hydraulic motor and whose lifting and lowering are operated by a hydraulic cylinder. It is automatically adjusted by the self-levelling device.

Engine

The AMRE 48 V motor drives the hydraulic system pumps.

Front wheels

Superelastic wheels

They are independent, fastened to the frame by means of a hub with built-in brake drum. The brakes are hydraulic. The parking brake is mechanical.

Rear wheel

Superelastic wheel

The rear axle is driving and steering. The steering is operated by a hydraulic cylinder connected to the power steering. A hydrostatic variable delivery pump with servoassisted control supplies a drive hydraulic motor for forward and reverse gear.

Dashboard

Fitted on the upper part of the frame and under the steering wheel, the dashboard houses the machine warning lights and instrumentation.

Joystick

This is a new system, fitted on sweepers for the first time, by means of which all the controls are grouped together in a single lever. The push-button switches located on the joystick perform all of the machine operational functions.

Hydraulic system

In the first circuit a variable delivery pump feeds the drive hydraulic motor (rear wheel). The forward and reverse drive are adjusted by a hydraulic assist operated by a pedal.

In the second circuit a gear pump feeds the power steering and a distributor. The distributor operates the hopper lifting cylinder, the side broom lifting and rotation cylinder, the skirt closing and opening cylinder. The power steering operates the steering cylinder.

In the third circuit the gear pump feeds a distributor which controls the main broom lifting/lowering and rotation cylinder and the fan hydraulic motor rotation.

All circuits are protected by suction filters and safety valves.

Electrical system

Power electrical system supplied by a 48V battery. The accessory electrical system is supplied by a 12V power supply. The circuits are protected by lamellar fuses housed in a special fuse box and by the power supply itself, that cuts the voltage supply in case of short circuit and then restarts it at circuit reset.

6

33014816(1)2005-07 A

Page 50
Image 50
Nilfisk-ALTO SR 1700 2WD B manuel dutilisation Machine Description

SR 1700 2WD B specifications

The Nilfisk-ALTO SR 1700 2WD B is a powerful ride-on scrubber dryer, specially designed for medium to large indoor areas such as retail spaces, warehouses, and industrial facilities. Built with efficiency and user comfort in mind, this advanced cleaning machine provides exceptional performance with several key features and innovative technologies that set it apart from its competitors.

One of the standout features of the SR 1700 2WD B is its effective dual-brush system that facilitates thorough cleaning of various floor types. The dual rotating brushes ensure an even, deep clean and can easily remove ingrained dirt and grime, leaving surfaces spotless. Furthermore, the adjustable brush pressure allows operators to customize cleaning according to specific surface requirements, optimizing performance while minimizing wear on brushes.

Equipped with a highly efficient vacuum system, the Nilfisk-ALTO SR 1700 2WD B excels in liquid recovery. It effectively picks up water and cleaning solution, resulting in safer, cleaner floors that dry quickly. This feature is particularly beneficial in high-traffic environments where slip hazards must be minimized.

The SR 1700 2WD B also features a reliable and easy-to-use control panel, which makes operation straightforward for any user. The intuitive design reduces the learning curve, allowing operators to concentrate on cleaning rather than grappling with complicated controls. Additionally, the ergonomic driving position enhances comfort during longer shifts, reducing fatigue and improving productivity.

Safety is a critical aspect of the Nilfisk-ALTO SR 1700 2WD B. The machine is designed with several safety features, including an automatic shut-off function to prevent accidents in case of operator error. Furthermore, the low center of gravity design improves stability while maneuvering, particularly in tight spaces and corners.

Moreover, the Nilfisk-ALTO SR 1700 2WD B is built to be environmentally friendly. It effectively reduces water and chemical consumption through its efficient cleaning system, contributing to sustainable cleaning practices. The robust build quality ensures a long lifespan, reducing the need for frequent replacements and minimizing waste.

Overall, the Nilfisk-ALTO SR 1700 2WD B combines cutting-edge technology with user-friendly design, offering reliability, efficiency, and superior cleaning results. Its combination of superior suction, adjustable brush pressure, and safety features make it an excellent choice for any facility looking to enhance its cleaning operations. The machine not only meets but exceeds the expectations of modern cleaning environments.