USER MANUAL

When necessary, dump the hopper as follows:

Lift the main broom.

Lift the side broom.

Close the skirt.

Drive the machine to the appointed dumping area.

Lift the hopper to the correct dumping height.

Open the skirt.

Lower the hopper.

Close the skirt.

Activate the filter shaker for approx. 20 seconds.

Lift the right side (left side optional) broom and the main broom by pressing the push-button. The brooms stop rotating.

By pressing the push-button lift the hopper to the required dumping height.

WARNING!

Move the machine extremely slowly when the hopper is in the lifted position.

Maximum speed 1 km/h.

Do not dump the hopper with the machine on a slope.

Skirt opening: open the skirt by pressing the joystick push-button.

Make sure that the skirt closing panel is completely open.

WARNING!

When dumping the hopper, make sure that nobody is near the machine.

Press the push-button to lower the hopper, so that it is supported by the rubber buffers on the frame.

WARNING!

Do not activate the filter shaker with the hopper in the lifted position.

Skirt closing: press the push-button to close the skirt closing panel.

Operate the filter shaker by pressing the push-button.

WARNING!

Do not activate the filter shaker with the hopper in the lifted position.

MACHINE STOP

At the end of the working shift, stop the sweeper in the appointed area with:

Brooms in the lifted position;

Hopper in the lowered position;

Parking brake lever engaged;

Lights off (if on);

Engine off;

Ignition key removed.

WARNING!

Never leave the hopper in the lifted position without using the safety props (1, Fig. L).

10

33014816(1)2005-07 A

Page 54
Image 54
Nilfisk-ALTO SR 1700 2WD B manuel dutilisation Machine Stop

SR 1700 2WD B specifications

The Nilfisk-ALTO SR 1700 2WD B is a powerful ride-on scrubber dryer, specially designed for medium to large indoor areas such as retail spaces, warehouses, and industrial facilities. Built with efficiency and user comfort in mind, this advanced cleaning machine provides exceptional performance with several key features and innovative technologies that set it apart from its competitors.

One of the standout features of the SR 1700 2WD B is its effective dual-brush system that facilitates thorough cleaning of various floor types. The dual rotating brushes ensure an even, deep clean and can easily remove ingrained dirt and grime, leaving surfaces spotless. Furthermore, the adjustable brush pressure allows operators to customize cleaning according to specific surface requirements, optimizing performance while minimizing wear on brushes.

Equipped with a highly efficient vacuum system, the Nilfisk-ALTO SR 1700 2WD B excels in liquid recovery. It effectively picks up water and cleaning solution, resulting in safer, cleaner floors that dry quickly. This feature is particularly beneficial in high-traffic environments where slip hazards must be minimized.

The SR 1700 2WD B also features a reliable and easy-to-use control panel, which makes operation straightforward for any user. The intuitive design reduces the learning curve, allowing operators to concentrate on cleaning rather than grappling with complicated controls. Additionally, the ergonomic driving position enhances comfort during longer shifts, reducing fatigue and improving productivity.

Safety is a critical aspect of the Nilfisk-ALTO SR 1700 2WD B. The machine is designed with several safety features, including an automatic shut-off function to prevent accidents in case of operator error. Furthermore, the low center of gravity design improves stability while maneuvering, particularly in tight spaces and corners.

Moreover, the Nilfisk-ALTO SR 1700 2WD B is built to be environmentally friendly. It effectively reduces water and chemical consumption through its efficient cleaning system, contributing to sustainable cleaning practices. The robust build quality ensures a long lifespan, reducing the need for frequent replacements and minimizing waste.

Overall, the Nilfisk-ALTO SR 1700 2WD B combines cutting-edge technology with user-friendly design, offering reliability, efficiency, and superior cleaning results. Its combination of superior suction, adjustable brush pressure, and safety features make it an excellent choice for any facility looking to enhance its cleaning operations. The machine not only meets but exceeds the expectations of modern cleaning environments.