1.In standby mode, select Menu > Settings > Voice commands.

2.Select a function option you wish to tag, and select Add.

3.Select Start, and speak the voice tag clearly into the microphone.

Do not select Quit unless you want to cancel the recording.

The phone replays then saves the

recorded tag. appears next to the function option for which you add a voice tag.

S e t t i n g s

Voice command options

You can modify voice command tags. In standby mode, select Menu > Settings > Voice commands, highlight the voice command tag, and select one of the following options:

Playback—Listen to the voice command tag.

Options > Change—Change the voice command tag.

Options > Delete—Erase the voice command tag.

Activate a voice command

After you have associated a voice command tag with a phone function, you can issue a command by speaking the voice command tag.

1.In standby mode, select and hold Names.

2.When Speak now appears, pronounce the voice tag clearly into the microphone.

When the phone finds the voice command tag, Found: appears, and the phone plays the recognised voice command tag through the earpiece. The function you requested is activated.

Connectivity

You can also connect the phone to a compatible PC using a USB data cable; and use the phone as a modem to enable connectivity from the PC. Remember to make back-up copies of important data.

For more information, see the Nokia PC Suite online help. Nokia PC Suite and all related software can be downloaded from the U.S. Mobile Phone products section of www.nokia- asia.com/pcsuite.

Important: only install and use applications and other software from sources that offer adequate security and protection against harmful software.

Copyright © 2006 Nokia. All rights reserved.

53

Page 63
Image 63
Nokia 2855 manual Connectivity, Voice command options, Activate a voice command, Playback-Listen to the voice command tag