Nokia 2855 Call divert, Call waiting, Restore factory settings, To activate, do the following

(for example, *900 to cancel Divert if busy), or press the end key to return to standby mode.

When you enter a network feature code successfully the feature becomes visible in the Network services menu.

Call divert

Call divert tells your network to redirect incoming calls to another number. Call divert is a network service and may not work the same in all networks, so contact your wireless provider for availability and information.

To activate, do the following:

1.In standby mode, select Menu > Settings > Network services > Call divert and the following:

Divert all calls—Divert all calls to the number you specify.

2.Select Activate.

3.Enter the number to which your calls, data, or other information are diverted, and select OK.

To cancel, in standby mode, select Menu > Settings > Network services > Call divert > Cancel all call diverting.

Cancel all call diverting may affect your ability to receive voice mail messages. Contact your wireless provider for specific details.

S e t t i n g s

Call waiting

Call If your wireless provider supports this feature, call waiting notifies you of an incoming call even while you are in a call. You can accept, reject, or ignore the incoming call.

To activate, in standby mode, select Menu > Settings > Network services > Call waiting > Activate.

During a call, select Answer or press the call key to answer the waiting call. The first call is put on hold. Press the end key to end the active call.

To cancel, in standby mode, select Menu > Settings > Network services > Call waiting > Cancel.

■Restore factory settings

You can reset some of the menu settings to their original values. Data that you have entered or downloaded is not deleted (for example, entries in your contacts list are not affected).

1.In standby mode, select Menu > Settings > Restore factory sett.

2.Enter the lock code, and select OK.

Note: Depending on your wireless service provider or network operator, your device may request the security code (defaulted to 12345) instead of the lock code.

Copyright © 2006 Nokia. All rights reserved. 63