S e t t i n g s

Hearing aid

A LPS-4 hearing aid accessory allows your device to optimise sound quality when coupled with a hearing aid that is set to T-coil mode.

In standby mode, select Menu > Settings > Enhancements > Hearing aid > Use hearing aid > Yes or No.

If the Hearing aid is connected and recognised through the Pop-Port™ connector, the phone automatically uses the Hearing aid.

TTY/TDD

Check with the manufacturer of the TTY/TDD device for a connecting cable that is compatible with your phone.

TTY/TDD communications depend on network availability. Check with your service provider for availability and description of services.

In standby mode, select Menu > Settings > Enhancements > TTY/TDD > Use TTY > Yes or No.

Charger

In standby mode, select Menu > Settings > Enhancements > Charger and one of the following:

Default profile—Select the profile you want to automatically activate when your phone is connected to the charger.

Lights— Select On or Automatic to keep the phone lights always on or to shut off automatically after several seconds.

Hearing aid

To optimise sound quality, you can set your phone to couple to a T-coil- equipped hearing aid.

In standby mode, select Menu > Settings > Enhancements > Hearing aid > T-coil hearing aid mode. Select On to activate the HAC. Verify that the hearing aid is set to T-coil mode, and hold the phone against the ear.

Only activate the T-coil hearing aid mode when using your device with a hearing aid or it may impact the audio performance of the device.

Security

To access Security for the first time, you must enter the preset lock code. By default, the preset lock code is the last four digits of your phone number. Depending on your wireless service provider or network operator, the preset lock code may be a four digit number such as 1234 or 0000. If none of these work, contact your wireless service provider or network operator for help.

58Copyright © 2006 Nokia. All rights reserved.

Page 68
Image 68
Nokia 2855 manual Security, Hearing aid, Charger