Nokia CC100 manual Delete the Obsolete EP Profile, Diagnosis

CC100Master Bridge User’s Guide

Status and Statistics

Show port LAN1/LAN2/HCNA Ethernet switch port link status and port statistics.

Reset to Default

Works for EP only, to reset all Ethernet settings/configurations of EP to factory default, including ‘Port Setup’, ‘QoS Setup’, ‘IGMP v2 Snooping Setup’, and ‘Tag VLAN Setup’.

Delete the Obsolete EP Profile

For the off-line EP’s only, the light in the Link field is grey; clicking on the ‘Del’ button will delete the EP profile.

Diagnosis

Click on the ‘Test’ button to run the built-in diagnostic tools.

Device Noise in Master and EP

‘Noise Test’ measures each individual device HCNA interface noise level (noise floor). For example, use a Master alone with 75Ω terminator, here shows the Master noise frequency spectrum diagram after test,

18