• SRS - the leading 3D sound technology in the world, which restores the spatial information that is masked by traditional recording and
| playback techniques. |
| • TruBass - SRS technology that enhances bass performance by uti- |
| lizing psychoacoustic techniques to restore the perception of low fre- |
| quency tones, delivering deep rich bass to your i830 internal |
| speakers or optional headphones. |
| • Focus - Elevates the sound image field to create the perception of |
| image height. When used in combination with SRS 3D, it delivers an |
| enlarged sound image while improving the clarity in the high fre- |
8 | quencies in your audio. |
Section | CarKit Volume |
| |
| The CarKit Volume determines the volume settings for voice |
| and PDA ringers when your i830 is attached to the optional |
| hands‐free kit installed in a vehicle. |
| Volume settings range from Silent to Loud. To set each option |
| for the optional CarKit, follow these steps: |
1.Tap Start located in the upper left corner of the screen.
2.Tap Settings.
3.Tap the System tab.
4.Tap CarKit Volume.
5.Using the stylus, tap the desired level on the slider for each of the volume settings available.
6. Tap | to save your settings and exit. |
Sounds and Notifications
The Sounds and Notifications settings allows you to select the actions for which you hear sounds and to customize how you notified when different events occur.
56 Section 8: Changing Your Settings
Password Setting
Turn volume off
You can turn the ringer off, or you can select one of the other Ring tone options, such as Vibrate, Vibrate and ring, or Vibrate then ring.
1.Tap Start located in the upper left corner of the screen.
2.Tap Settings, then tap the Personal tab.
3.Tap Phone.
4.Tap the drop down arrow next to Ring type and select one of the Vibrate options or select None.
5. Tap | to exit. |
Password Setting
The password option allows you to enable or disable a password. The available settings are:
•Simple
•Strong alphanumeric password - Allows you to enter a password that contains letters, numbers, or both.
When a password is configured, there is a ʺprompt if device unusedʺ option that allows a length of time range from 0 minutes ‐ 24 hours. When this option is set, you can continue to use the i830 until the screen turns off due to inactivity. If the device is inactive for a greater amount of time than specified in this setting, a password must be entered when you turn the device back on.
Phone Settings
Phone options are divided into the following tabs:
•Phone - Use Phone Mode to set your phone for the operational mode of Verizon (CDMA) or Int’l (GSM).
•Option - Allows you to configure the SMS Call Back Number, as well as the Answer options for your phone.
Section 8: Changing Your Settings 57
