24.Press a 1Ó x 2Ó Inner Cap (43) into each end of the Backrest Frame (15).
Attach the Backrest (41) to the Backrest Frame (15) with four 1/4Ó x 3/4Ó Bolts (17).
Press a 3/4Ó Round Inner Cap (34) into each end of the pad tube on the Backrest Frame (15).
Slide a Leg Foam Roller (74) onto each end of the pad tube on the Backrest Frame (15). Note: The Leg Foam Rollers are thinner than the four Foam Rollers (30) used in step 26.
25.Locate the Adjustment Knob (9) on the backrest tube of the Main Upright (3). Unscrew the handle on the Adjustment Knob until it is loose. Pull out the handle as far as it will go and slide the adjustment tube on the Backrest Frame (15) into the backrest tube.
Release the handle on the Adjustment Knob (9) and let the Knob snap into one of the adjustment holes on the Backrest Frame (15). Tighten the handle fully.
24 | 43 |
| |
17 | 41 |
| |
| 34 |
| 15 |
17 | 74 |
| |
74 |
|
| 43 |
| Pad Tube |
34 |
|
25 |
|
Backrest | 3 |
Tube |
|
| 15 |
| 9 |
| Adjustment |
| Holes |
26.Press a 3/4Ó Round Inner Cap (34) into each end of the two Pad Tubes (28).
Slide a Pad Tube (28) into the hole in the front leg on the Base (8). Slide a Foam Roller (30) onto each end of the Pad Tube.
Slide a Pad Tube (28) into the hole in the Leg Lever (29). Slide a Foam Roller (30) onto each end of the Pad Tube.
14
26 |
|
| 34 |
|
| 8 | 30 |
|
|
| |
|
|
| 28 |
|
|
| 34 |
| 34 |
|
|
|
| 30 |
|
| 30 |
| 29 |
|
|
| |
34 |
|
|
|
