eChannel 2 Set point – Control channel 2 setpoint for relative humidity in space
fSystem Demand – Indicates humidifier system demand based on input signal calculations
gDemand/rh_Configuration Parameter – Configures humidifier to accept demand or %rh signal(s) (read/write).
hRemote fault Indication – System fault indication and alarm status (read).
iNetwork Sensors – Allows
jRemote Disable – Provides remote humidifier enable/disable system control. (read/write).
kRemote Service Indication – Provides remote humidifier service indication (read).
lRemote Status Indication – Provides remote humidifier on/standby system status indication (read).
(3)Remote Monitoring And Control Options (NHTC and NHTC OUTDOOR only) Reference: Section 15900 - Building Controls and Automation
(a)NORTEC OnLine web based monitoring and control from any location with Internet access, using standard Internet Explorer, version 6.0 or newer.
(b)NORTEC OnLine remote monitoring hardware using secure <DHCP Ethernet Connection> or <Static IP Ethernet Connection> or
(c)NORTEC OnLine Monitoring Service (NOMeS) with weekly humidifier examination by factory direct technicians for first year, renewable/extendable up three consecutive years.
(d)One additional year (third year), extended humidifier warranty when renewed/ extended for third year of NORTEC OnLine Monitoring Service (NOMeS).
(e)Packaged accessory, factory installed and ready for customer supplied <Ethernet> or <Modem> communication connection.
(f)Package will include the listed items in either paragraph (f) 1 through 17 or paragraph (g) 1 through 7:
1 Internet accessible graphical representation of humidifier performance.
2 Remotely enable/disable humidifier.
3 Remotely adjust rh% set point(s), if equipped.
4 Remotely adjust ‘limited capacity’.
5 Automated
6 Up to three customer
7 Up to 50 incidents, of factory direct support and
9 Weekly checks by NORTEC OnLine factory technicians.
10 Remote factory diagnostics and programming capability.