2Published replacement pricing.
3Cylinder seams must be spin welded to ensure
4Integral electronics to ensure safe operation.
5High water sensor circuitry to prevent over filling.
6Efficient operation over a wide range of water conditions.
7Simple maintenance without disassembly or removal of humidifier. No specialized tools required.
8Full output and maximum energy efficiency through entire cylinder life.
9‘Drain through bottom’ to ensure highest mineral concentration is effectively removed. Simple skimmers are not acceptable.
10Large perforated strainer at drain outlet to prevent blockage of drain valve or drain lines.
11
12Safety characteristics ensuring no current flow with absence of water, independent of safety controls. Resistive element not acceptable.
(d)Unit(s) to be complete with:
1‘Total Controller’ microprocessor to control all humidifier functions with interface capabilities for remote communication technologies, including Internet or BMS requirements.
2Advanced water management utilizing the patented Proportional plus Integral Autoadaptive control system for optimal energy efficiency, water usage and cylinder life.
3Microprocessor controlled fill valve and drain valve allowing automatic water management.
4Internal drain water tempering to ensure maximum 140°F (60°C) drain water.
5Integral fill cup with minimum
6Smart cylinder EPROM for improved operation providing: a Cylinder identification with model, data, and capacity. b Cylinder self diagnostics ensuring safe operation.
c End of cylinder life status. d Cylinder run time in hours.
7Full cylinder indication and
8Automatic pulse feature to clean any obstruction from the drain solenoid valve when needed.
9Automatic