1. SUBMITTAL DESCRIPTIONS
A.INTRODUCTION
(1)The information found in this section is general in nature and consists of part numbers, product descriptions and options, dimensions, specifications and equipment features.
B.NH UNIT
(1)The different wiring connections to the humidifier unit can be found in Figure 2. All wiring is to be in accordance with existing national and local electrical codes.
(2)Performance data for single and double units can be found in Figure 3, Figure 4, and Figure 5.
(3)NH Series unit options and common accessories universal are found in Tables 1 and 2.
C.DISTRIBUTORS
(1)A description of the accessories for the steam distributor can be found in Table 3.
(2)Dimensions for the steam distributor are found in Figure 6, Figure 7, Figure 8.
D.SAM-e
(1)This section identifies the dimensions for the various configurations and components that make up a
(2)General dimensions for the
(3)For an
(4)For an
(5)For an outside duct installation without mounting frame refer to Figure 13.
(6)For an outside duct installation with mounting frame refer to Figure 14.
(7)For a vertical duct installation refer to Figure 15.
(8)For outside duct mounting cover plates refer to Figure 16.
(9)For atmospheric
(10)For atmospheric steam header and adapter configuration refer to Figure 18.
E.BLOWER PACK
(1)Remote Blower Packs
(a)Remote blower packs are powered from the NH humidifier from a primary voltage terminal block provided and fed from the leaving side of the unit contactor to operate blower pack in conjunction with unit operation. A matching terminal block is incorporated in the blower pack. Field wiring is required
Page 74