Installing and Connecting the Hardware
Connecting to a HotWire 8600 DSLAM Via Telnet
You can connect to a HotWire 8600 DSLAM via a telnet session from either a workstation or PC that has access to the Management Domain LAN.
"Procedure
If you are using a Solaris 2 or SUN OS 4 workstation:
1.Execute a window manager program, such as OpenWin.
2.Execute a terminal emulator program.
3.Set terminal type to VT100.
4.Establish a telnet session by issuing the telnet command and providing the Management Domain IP address for the MCC card on the command line.
If you are using a PC, establish a telnet session by issuing the telnet command and providing the Management Domain IP address for the MCC on the command line.
See Chapter 3 for IP address information.
| October 1997 |