Nortel Networks 8600 manual Procedure, Initial Setup Instructions

Initial Setup Instructions

"Procedure

To set the IP address and subnet mask from the console terminal:

1.Power up the chassis. After the self-test completes, the Who Am I screen will appear.

2.From the Who Am I screen, enter the Management Domain IP address of the MCC card and press the Return key. For example, if the IP address of the MCC card is 198.152.152.50, type this value at the (nnn.nnn.nnn.nnn): prompt as illustrated below.

The system automatically calculates the subnet mask based on the IP address you enter.

3-2 October 1997 8600-A2-GN20-20