Nortel Networks 8600 manual Telco 50-Pin Connector Pinouts for DSL Loops and POTS Splitters

Pinouts

Telco 50-Pin Connector Pinouts for DSL Loops and POTS Splitters

1

25

26

5097-15526

The Telco 50-pin receptacle on the Front Panel provides the two-wire loop interface from each DSL port to either the POTS splitter shelf or, if the loop is not being shared with POTS, then to the Main Distributing Frame (MDF). The following table lists the pin assignments for each of these interfaces.

NOTE:

When the 8600 chassis is the base chassis, the MCC is installed in Slot 1 and the Tips and Rings for Slot 1 are not connected internally to the DSL and are not active.

CONNECTOR	CONNECTOR PINS
(DSL Slot, Port #)	(Tip, Ring)
Slot 1, Port 1	1, 26
Slot 1, Port 2	2, 27
Slot 1, Port 3	3, 28
Slot 1, Port 4	4, 29
Slot 2, Port 1	5, 30
Slot 2, Port 2	6, 31
Slot 2, Port 3	7, 32
Slot 2, Port 4	8, 33
Slot 3, Port 1	9, 34
Slot 3, Port 2	10, 35
Slot 3, Port 3	11, 36
Slot 3, Port 4	12, 37

B-4 October 1997 8600-A2-GN20-20