Initial Setup Instructions
3.Do one of the following at the (nnn.nnn.nnn.nnn): prompt:
ÐTo accept the subnet mask, press Return.
ÐTo enter a different subnet mask, enter a new subnet mask and press Return.
The system highlights the OK to restart?: prompt.
4.Type y at the yes/no: prompt to restart the card or n to decline the restart. If you type y, the card restarts. You can now log in remotely using telnet or an SNMP NMS to configure the cards. Refer to the HotWire DSLAM for 8540 and 8546 DSL Cards User's Guide for detailed instructions.
October 1997 |
