AT commands 51
Data Bearer Call Answer Control
The Data Bearer Call Answer Control Command
%A95=value
allows the CTA 500dm to accept or reject incoming calls received over the data bearer service.
The following table shows the values for data bearer service calls control.
Value
0
1
Data Bearer Service Calls
rejected (default)
accepted
Result Codes
OK Appears when the selected value is understood.
ERROR Appears when the selected value is not recognized or is not supported.
Ringing Indications
When the CTA 500dm detects an incoming call that it is allowed to accept, the RI pin is asserted (see ÒSerial Interface Control LinesÓ on page 56 for more information), and a text string is provided to the serial interface. The text string is repeated every 6 seconds until the call is answered (manually or automatically), disconnected by the caller, or if the CTA 500dm is reset (such as assertion of DTR if &D is 2 or 3).
Result Code
RING Appears when an incoming call is received.
P0873832 Issue 05 | CTA 500dm On Line Guide |
