Nortel Networks CTA 500dm AT commands, Command, Description, Value, A98=n, set outgoing call type

68 AT commands

Command	Description	Value
%A98=n	set outgoing call type	0	data bearer service
		(default)
		1	3.1 kHz audio bearer
		service
		2	speech bearer service
%A4=n	select speed of TCM	0	64 kbit/s
	channels, outgoing calls	1	56 kbit/s (default)
%A93=n	set speech bearer	0	disabled (default)
	call answer	1	enabled
%A94=n	set 3.1 kHz audio bearer	0	disabled (default)
	call answer	1	enabled
%A95=n	set data bearer	0	disabled (default)
	call answer	1	enabled
%A5=n	select speed of TCM	0	64 kbit/s
	channels, incoming voice	1	56 kbit/s (default)
	bearer service calls
%A2=n	select rate adaptation	95	PPP async-to-sync
	protocol	conversion
		96 MP
@B0=n	set number of links	1	single channel used
	in MP bundle	2	both channels used
		(default)
&P2=n	serial interface rate	0	autobauding
		1,200
		2,400
		4,800
		9,600
		19,200
		38,400
		57,600
		115,200 (default)
&P3=n	serial interface parity	0	none (default)
		1	odd
		2	even
&P4=n	serial interface data	7-8 (8 is default)
	bits per character

CTA 500dm On Line Guide P0873832 Issue 05