3
Before you start
❑Make sure you read and follow the instructions in this guide.
❑Make sure you have the necessary tools to complete the installation. A Special parts check list is provided in this guide.
❑Make sure all equipment in the FastRAD package is accounted for. A Package check list is provided in this guide.
❑Make sure the necessary environment and electrical con- ditions are met. An Environment check list and list of Electrical requirements are provided in this guide.
Important: Only one FastRAD can be connected to a KSU.
Environment check list
The FastRAD installation area should be:
❑clean, free of dust, dry and well ventilated
❑between 0° and 50° Celsius (32° to 122° Fahrenheit)
❑
❑within 800 m (2600 feet) of the Norstar KSU
Note: When using a Norstar 3X8 KSU the FastRAD must be installed within 305 m (1000 feet).
❑free of Bridge taps on the FastRAD KSU TCM loop
❑free of Loading coils on the FastRAD KSU TCM loop
Package check list
Make sure the package contains:
❑the Norstar FastRAD
❑an
❑a power supply with a barrel connector
❑a paper template (for mounting)
