Nortel Networks FastRad manual FastRAD Programming Record

22

Programming Record

Complete the FastRAD Programming Record before you start programming.

FastRAD Programming Record

Work Site: _______________________________________________________________

Address:	________________________	Telephone Number: __________________
	________________________	Installation Date:	__________________
	________________________	Installer:	__________________
Notes:	_______________________________________________________________
GENERAL

System ID Number

__________

Enter the System ID number. (Disable Admin if required.)

ALARM

Auto-	Off	❑	Choose if you want the FastRAD to report alarms. The default is
report	On	❑	Off.
Report			Enter the line number. Enter a number between 001 and 999.
Line	__________		The default is 001.
Alarm			Enter the telephone number of the device where the FastRAD
Number 1	__________		reports alarms.
Alarm			Enter the telephone number of a second device where the
Number 2	__________		FastRAD reports alarms.
Retry			Enter the number of minutes the FastRAD waits before it retries
Delay	__________		to report an alarm. Enter a number between 1 and 99.
Number			Enter how many times a FastRAD tries to send an alarm after a
of Retries	__________		failed connection attempt. Enter a number between 0 and 9.
Alarm	Low	❑	Choose the alarm baud number. The default is High.
Baud	Medium❑
	High	❑
Parity	None	❑	Choose which parity setting the FastRAD uses. The default is
	Odd	❑	None.
	Even	❑
DATA
Auto-	Off	❑	Choose if you want the FastRAD to answer incoming calls
answer	On	❑	(must be ON to allow remote, unassisted access). The default is
			Off.
Answer			Enter the line number. An on-core KSU line is recommended.
Line	__________		Enter a number between 001 and 999. The default is 001.

FastRAD Installation Guide