Nortel Networks P0886634 manual DVCs

Installing the DFC on systems equipped with	2
DVCs

Only one DFC can be installed in the Norstar Applications Module (NAM). The DFC connects to the DVCs through the PCM Expansion Bus (PEB) cable. This cable must be connected from the DFC to each DVC. The PEB cable connects the DFC to the DVC to share the ports connected to Norstar.

The following section provides step-by-step instructions for the installation of the FAX software, a DFC and the PEB cable in a Norstar Voice Mail system equipped with Digital Voice Cards (DVC)s. For information on installing a DFC in a Norstar Voice Mail system equipped with a Media Services Base Interface Card (BIC), refer to "Installing the DFC on systems equipped with a BIC" on page 17.

Figure 2 Digital Fax Card and PEB cable

PEB Connector
Interrupt	SW2	SW1
PEB Terminator

P0886634 Issue 1.0 FAX Installation Guide