Nortel Networks P0886634 manual Enabling the FAX software

Installing the DFC on systems equipped with a BIC 27

Enabling the FAX software

The FAX option must be enabled after installing the DFC.

After FAX capability has been added to Norstar Voice Mail, you can add or customize Fax Overflow and Fax-on-demand information. For more information about customizing the FAX software, refer to the Norstar Voice Mail FAX Set Up and Operation Guide.

1.Insert the FXENABLE diskette into the floppy disk drive.

2.Plug the power cord into the AC outlet and wait for the NAM to boot from the disk. This takes two to three minutes.

3.When all disk activity has ceased and the light on the floppy disk drive goes out, unplug the NAM and remove the FXENABLE diskette from the floppy disk drive.

4.Replace the front cover. Insert the tongues on the bottom of the front cover into the module slots.

5.Fasten the two screws holding the front cover to the module.

6.Close the module door. To lock the door, turn the lock 90° clockwise until the screwdriver slot is horizontal.

7.Plug the power cord into the AC outlet.

P0886634 Issue 1.0 FAX Installation Guide