Installing the DFC on systems equipped with

3

a BIC

Only one DFC can be installed in the NAM. The DFC connects to the Media Services Bus Expansion Card (BEC) daughterboard attached to the Media Services Base Interface Card (BIC) through the PCM Expansion Bus (PEB) cable. This cable must be connected from the DFC to the BIC. The PEB cable connects the DFC to the BIC to share the ports connected to the Norstar KSU.

The following section provides step-by-step instructions for the installation of the FAX software, a DFC, a BEC and the PEB cable in a Norstar Voice Mail system that is equipped with a BIC. For information on installing a DFC in a

Norstar Voice Mail system equipped with a Digital Voice Card (DVC), refer to "Installing the DFC on systems equipped with DVCs" on page 5.

Figure 12 Digital Fax Card

PEB Connector

 

 

Interrupt

SW2

SW1

PEB Terminator

 

 

P0886634 Issue 1.0

FAX Installation Guide

Page 23
Image 23
Nortel Networks P0886634 manual Bic