Novatel user manual SMART-AG Specifications

Technical Specifications						Appendix A
A.2 SMART-AG Specifications
		INPUT/OUTPUT CONNECTORS
	SMART-AG COM/PWR	+8 to +36 V DC at 2.5 W (typical while logging) a
		For the cable pinouts and drawings, see Section A.2.1, SMART-AG
		Power/Communications Development kit Cable starting on Page 53
	Serial Com Ports	RS-232 F Compliant (Rx and Tx signals only)
	CAN	SAE J1939/ ISO 11783/ ISO 11898 Compliant
	Emulated Radar Output	High= Supply Voltage -0.5V Minimum
		Low= 0.5V Minimum
		Load= 3K Ohm Minimum
	PPS Output	3.3 V CMOS Logic Compatible
	MKI Input	3.3V CMOS Logic/ 5V Tolerant
		INPUT/ OUTPUT CONNECTOR PROTECTION
	Electrical Conducted/	ISO 7637:2002 (Survives all pulse types)
	Coupled disturbance
	tolerance
			LED INDICATORS
	More details can also be found in Section 2.2.2, Status Indicators starting on Page 23
				PHYSICAL
	Size	155.3 x 66.8 x		φ	155 mm	b
	Weight	495 g maximum
			ENVIRONMENTAL
	Operating Temperature	-40°C to +75°C
	Storage Temperature	-55°C to +90°C
	Humidity	Not to exceed 95% non-condensing
	Vibration c	Random			MIL-STD-810F Method 514.5 C17
		Sinusoidal			IEC 68-2-6 ASAE EP455, 5.15.2 Level 1
		Shock			MIL-STD-810 F Method 516.5

a.When tracking GPS satellites.

b.φ denotes diameter, here and in the Dimensions graphic on Page 52.

c.See also the Notice section of this manual starting on Page 13.

SMART-AG User Manual Rev 2 51