Novatel SMART-AG user manual Convert Command Line Switches, NovAtel Logs for Rinex Conversion

PC Utilities				Chapter 4
	Table 6: NovAtel Logs for Rinex Conversion
	NovAtel OEMV Family Log		Recommended Trigger
	RANGEA/B, or	ontime 15
	RANGECMPA/B
	BESTPOSA/B, or	once
	PSRPOSA/B, or
	RTKPOSA/B, or
	MARKPOSA/B
	IONUTCA/B	onchanged
	RAWEPHEMA/B	onchanged
	GLORAWEPHEMA/B	onchanged
	VERSIONA/B a	once
	SITEDEFA/B b	once

a.Information from this log overrides data entered into the Receiver Number, Type and Version fields using the OBS file button of the RINEX Headers section, see Figure 6 on Page 41.

b.Available on DL-V3 receivers, refer to the DL-V3 User Manual. Information from this log overrides data entered into the Marker Name, Marker Number, Antenna Type and Antenna Delta H fields using the OBS file button of the RINEX Headers section.

4.3.2Convert Command Line Switches

Convert4 supports several command-line switches to facilitate batch processing. To access its Command Line Arguments window, open a command prompt window (select Accessories Command Prompt from the Start menu). Change directory (cd) to the directory on your hard drive that Convert4 is stored. Type the following: convert4 -h

The Convert4 Command Line Arguments window appears as shown in Figure 7.

Figure 7: Convert Command Line Arguments

SMART-AG User Manual Rev 2 43