Playback Options: The Playback Menu
z Slide Show
Play back pictures stored in the internal memory or on a memory card in an automated “slide show”.
1 Display the slide show menu; use the rotary multi selector to choose [Start] and press d.
To change the interval between pictures, choose [Frame intvl], select the desired interval time, and press d before choosing [Start].
Slide show Pause:
Start
Frame intvl
Loop
Exit
Menus Setup and Playback, Shooting,
100
To repeat the slide show automatically, enable [Loop]
and press d before choosing [Start]. The check mark (y) will be added to the loop option when enabled.
2 The slide show begins.
While the slide show is in progress, the following operations can be performed:
• Use the rotary multi selector to switch pictures. Continue rotating in either direction to fast forward (clockwise) or rewind (counterclockwise).
• Press d to pause the slide show.
The menu shown at right is displayed when the slide | Pause | |
show ends or is paused. Choose [Restart] and press | ||
| ||
d to play the slide show again, or choose [End] to |
| |
stop the slide show and return to the playback menu. |
| |
| Restart | |
| End | |
| Frame intvl |
jNotes on Slide Show
•Only the first frame of movies (c 68) included in slide shows is displayed.
•Even if [Loop] is selected, the monitor will turn off automatically if no operations are performed for 30 minutes. The camera will turn off automatically if no operations are performed for another three minutes.