Choosing the Desired SSID and Uploading Pictures

kMessage Displayed During Transfer

The message shown at right is displayed in the monitor during picture transfer. The antenna icon in the top left corner of the monitor indicates signal strength (5-levels). The icon changes to red when outside the network area. When signal strength is poor, remove any obstacles between the camera antenna and access point. To cancel the current transfer, press d.

I 11MB:Available Transferring images

to server.

0 0 2 / 0 0 4

Cancel

kWireless LAN LED

The wireless LAN LED (c 6) is located on the side of the camera (inside the antenna). The camera is searching for profiles when the LED blinks, a wireless connection is established when the LED is lit, and the camera is disconnected from a wireless LAN when the LED is off. If transfer is not performed for a while, the LED may blink to save power.

kThe Memory Card Write-Protect Switch

When the memory card write-protect switch is in the “lock” position, transfer over a wireless LAN connection cannot be performed.

l Checking SSID Contents

 

 

 

 

 

 

 

 

Pressing v (l) in the SSID selection screen displays the

SSID:My Network

network name (SSID) and the profile type.

 

 

 

 

Type:Home SSID

Back

Services Wireless

147