Wireless LAN Settings for the Camera
To take advantage of my Picturetown using the wireless features, network settings including a network profile and sender information, must be configured for the wireless LAN. Refer to the information below for assistance in configuring settings using the [Wireless settings] option in the camera’s setup menu or the Utility on a computer.
The camera’s setup menu | my Picturetown Utility |
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
Services Wireless
Network Profile (mandatory configuration)
“Network profile” refers to the network settings configured for connection via a wireless LAN access point that supports Internet connection. To use my Picturetown services, configure the following network settings to match those used by the desired wireless LAN (access point).
Network name (SSID)
Enter the name of the network (up to 32 characters) to which the access point belongs. If a name is displayed when configuring a network profile using the Utility, use that name. If more than one name is displayed, choose the desired network name.
Authentication
Select an authentication method from [Open system], [Shared key], [WPA- PSK], or
Encryption
Make your wireless LAN connection more secure by encrypting data. The encryption method(s) available to the camera differ depending upon the authentication method selected (see below).
Authentication method | Encryption method(s) available to the camera |
[Open system] | [None] or [WEP] |
|
|
[Shared key] | [WEP] |
[TKIP] | |
|
|
[AES] | |
|
|
124