Charging the Battery

Insert the battery and charge it with the AC Adapter EH-64 (supplied) before first use or when the battery is running low.

2 4

Steps First

1

3

1 Connect the power cable and AC adapter 1.

2 Turn off the camera.

If the power-on lamp (green) is lit, press the power switch to turn off the camera. You cannot charge the battery while the camera is turned on.

3 Connect the AC adapter to the camera’s multi connector 2.

The multi connector should be fully inserted.

4 Plug the power cable into an outlet 3.

The AC adapter power-on lamp will light 4.

kCharging the Battery After Setting the Camera’s Clock

When the camera’s built-in clock has not been set, the battery begins charging when the AC adapter is connected. Once the clock is set, Picture Bank (c 144) will start when the AC adapter is connected, and the camera will attempt to upload pictures to the my Picturetown server. Press d to cancel picture upload and charge the battery. Picture Bank can be set so that it does not start automatically when the AC adapter is connected (c 145).

5 The battery begins charging.

The power-on lamp net to the power switch will blink orange as the battery charges. If the lamp flickers rapidly, the AC adapter is not correctly inserted or the battery is faulty. Reinsert the AC adapter or replace the battery.

16A fully exhausted battery will recharge in about two hours.