HOW TO CHANGE THE SETTINGS - USER
It should be noted that many of these settings can be, and often are, overridden by settings in the Windows printer drivers. However, several of the driver settings can be left at “Printer Setting”, which will then default to the settings entered in these printer menus.
Where applicable, factory default settings are shown in bold type in the following tables.
In the normal operating condition, known as “standby,” the printer’s LCD window will show “ONLINE.” In this condition, to enter the menu system, press the +/– buttons on the operator panel to move up and down through the list of menus until the menu you wish to view is displayed. Then proceed as follows:
1.Press ENTER to enter the menu.
2.Use the +/– buttons to move up and down through the items in the menu. When the item you want to change is displayed, press ENTER to edit that item. An asterisk (*) appears next to the setting currently in effect.
3.Use the +/– buttons to move up and down through the available settings for this item, and press ENTER when the setting you want is displayed. An asterisk (*) will appear next to the setting, indicating that this setting is now in effect.
4.Press BACK to move back to the list of menu items.
5.Do one of the following:
>Press BACK again to move up to the list of menus; or…
>Press ON LINE to exit from the menu system and return to standby.
NOTE:
When you have changed any settings in the USB MENU, turn the printer OFF, then ON again.
Menu functions > 112