MEMORY UPGRADE

The basic printer model comes equipped with 256MB of main memory. This can be upgraded with an additional memory board of 256MB or 512MB, giving a maximum total memory capacity of 768MB.

Installation only takes a few minutes, and does not require any tools.

CAUTION

Observe antistatic precautions when carrying out this installation.

1.Switch the printer off and disconnect the AC power cable.

2.Press the cover release and open the printer’s top cover fully.

3.Lift the front cover latch and pull open the front cover.

WARNING!

If the printer has been powered on recently, the fuser will be hot. This area is clearly labelled. Do not touch.

Installing upgrades > 152