ITEM | SETTINGS | EXPLANATION |
|
|
|
FRAME TYPE | AUTO / 802.2 / | Selects the Ethernet MAC layer frame |
| 802.3 / | type. |
| ETHERNET II / |
|
| SNAP |
|
|
|
|
IP ADDRESS | AUTO / | Specifies whether IP address allocation |
SET | MANUAL | is automatic (DHCP) or manually |
|
| assigned. |
|
|
|
IP ADDRESS | xxx.xxx.xxx.xxx | Current assigned IP address. To |
|
| change, press ENTER and use +/– |
|
| keys to increment 1st octet, then press |
|
| ENTER again to move on to next octet. |
|
| When 4th octet has been set, press |
|
| ENTER again to register new address. |
|
|
|
SUBNET MASK | xxx.xxx.xxx.xxx | Current assigned subnet mask. To |
|
| change, proceed as above. |
|
|
|
GATEWAY | xxx.xxx.xxx.xxx | Current assigned gateway address. To |
ADDRESS |
| change, proceed as above. |
|
|
|
FACTORY | EXECUTE | Reloads the settings present when the |
DEFAULTS |
| unit was setup by the manufacturer. |
|
|
|
WEB | ENABLE / | Enables or disables Web config. facility. |
| DISABLE |
|
|
|
|
TELNET | ENABLE / | Enables or disables Telnet config. |
| DISABLE | facility. |
|
|
|
FTP | ENABLE / | Enables or disables communication via |
| DISABLE | FTP. |
|
|
|
Menu functions > 130