profile using Profile Assistant. See “Using Profile Assistant” on page 56.
10.From the [Simulation Target Profile] menu (9), select the profile of the device you wish to simulate.
Remember that the names “CMYK Source 1”, “CMYK Source 2” and so on relate to the number assigned to the profile using Profile Assistant. See “Using Profile Assistant” on page 56.
11.From the [Feature Sets] menu (10), select [Colour – Graphic Pro 3].
10
11
12.From the [Printer Output Profile] menu (11), select your printer profile.
If [Auto] is selected, the factory default profiles that are embedded in the printer will be used. If you have created a printer profile yourself using profile creation software, select it here and choose a rendering intent (see “Rendering intents” on page 72).
Colour matching (advanced) > 67