9.Identify the RAM expansion slot (1) in the printer.

10.If the RAM expansion slot already contains a memory upgrade board, that board will have to be removed before you can install the new one. To remove it, proceed as follows, otherwise skip to step 11.

(a)Grip the board firmly by its short edges and pull it out of the slot.

(b)Place the removed memory board in the antistatic bag which originally contained the new memory board.

11.Hold the new memory board by its short edges, so that the edge connector faces towards the RAM expansion slot.

12.Gently push the board into the RAM expansion slot until it latches in and will not go any further.Press down on the module toward the PCB.

Installing upgrades > 154