10.Close the front cover and the top cover, pressing down firmly at each side to latch it closed.

CAUTION!

After installing additional memory (hard disk drive), any covers removed or doors opened must be closed or replaced and secured to prevent risk of fire.

11.Reconnect the AC power cable and switch the printer on.

12.When the printer is ready, print a menu map as follows:

13.Press the + button to access the Information Menu.

14.Press ENTER once for the menu map.

15.Press ENTER again to print the menu map.

16.When the menu map is printed, press ON LINE to exit the menu system.

17.Examine the first page of the menu map.

18.Near the top of the page, between the two horizontal lines, you will see the current printer configuration. This should now indicate that the hard disk unit is installed.

Installing upgrades > 159