WINDOWS

If you are using a source RGB document, simulate the output of another printer by making the following selections in the printer driver:

1.On the printer driver [Colour] tab, select [Graphic Pro] (1) and click [Options].

1

2

35

2.Select [Printer Simulation] (2).

3.Select the ICC profile that corresponds to the device used to capture or display your source document - this could be a monitor, scanner or digital camera (3).

4.Remember that the names “RGB Source 1”, “RGB Source 2” and so on relate to the number assigned to the profile using Profile Assistant. See “Using Profile Assistant” on page 56.

5.Select a Simulation Target Profile (4).

Colour matching (advanced) > 64