HOW TO CHANGE THE SETTINGS - ADMINISTRATOR

You can set whether to ENABLE or DISABLE each category in the user menu.

Disabled categories are not displayed in the User’s menu. Only a system administrator can change these settings.

1.Turn OFF the printer.

2.Turn ON the printer while pressing the “ENTER” button.

When [ADMIN MENU] appears, take your finger off the button.

3.Press the “ENTER” button.

4.When [ENTER PASSWORD] appears, press the “MENU+” or “MENU-” button several times to display the 1st line of the password and then press the “ENTER” button.

5.Enter your 4- to 9-digit password. The default password is “aaaaaa”.

6.Press the “MENU+” button until the “category” you want to change is displayed.

7.Press the “ENTER” button.

8.Press the “MENU+” or “MENU-” until the “item” you want to change is displayed.

9.Press the “ENTER” button.

10.To execute it, press the “MENU+” button or “MENU-” button to display “YES” and then press the “ENTER” button. The printer automatically reboots.

11.When [PLEASE POW OFF/SHUTDOWN COMP] is displayed, turn the printer OFF/ON

12.Press the “MENU+” button or “MENU-” until the “setting” you want is displayed.

13.Press the “ENTER” button to enter [*] on the right side of the setting selected.

14.Press the “ONLINE” button to switch to [ONLINE].

Menu functions > 113