WINDOWS PCL
1.In the driver’s [Setup] tab, recall any saved [driver settings] you may wish to use.
2.Choose [Booklet] from the [Finishing Mode]
3.In the Options window you can set the [signature] size, the number of [pages] per side of paper and the [binding margin] if your document is going to be thick. The graphic in this window shows the effect of each choice you make.
NOTE:
If the Booklet choice is not shown, check that the Duplex option is enabled in the driver. (See “Setting the driver device options” on page 29.)
Colour matching (advanced) > 79