36 Control Panel and Configuration Menu

Specifying Settings in the Utility Menu

General Procedure for Specifying Settings in the Utility

Menu

1Press the or key to select UTILITY, and then press the Enter key.
2Press the or key to select the desired menu, and then press the Enter
key to display the selected menu.
" Refer to the menu configuration on page 1-18 to display the desired
menu.
3To select a setting, press the , , or key.
To enter a setting, use the keypad to type in the number.
4Press the Enter key.
The setting is applied.
" To cancel the settings, press the Back key.

Memory Reception

Received faxes can be stored in the memory and printed at a specified time. This
is convenient, for example, when confidential documents are received.
Memory reception can be used with the following settings.
Start/end time settings: Not set
MEMORY RX MODE function is normally set to ON. To print a fax saved in
memory, set MEMORY RX MODE function to OFF.
Start/end time settings: Set
Memory reception mode begins and ends at the specified time.
Example 1: When ON TIME setting is set to 18:00 and OFF TIME setting is
set to 8:00
The machine is in memory reception mode from 18:00 to 8:00 and in nor-
mal reception mode, where faxes are printed after being received, from
8:00 to 18:00.
Example 2: When ON TIME setting is set to 12:00 and OFF TIME setting is
set to 12:00 (the start time and end time are the same)
MEMORY RX MODE function is normally set to ON; however, faxes
saved in memory are printed at 12:00.