48 Sending Faxes
2Check that LIST is selected, and then press the Enter key.
The list of programmed speed dial numbers and group dial numbers is dis-
played.
3Press the or key to select the desired destination, and then press the
Enter key.
" If a destination was incorrectly selected, press the Back key, and then
perform the operation again from step 1.
4When EDIT=Select appears, press the Enter key again.
5Press the or key to select FINISH, and then press the Enter key.
" To erase the selected destinations, press the Stop/Reset key.
Using the Search Function of the Phone Book
If a recipient is registered with a speed dial number or a group dial number, the
recipient can be found by using the List or Search function of the phone book.
Follow the procedure described below to search using the Search function of the
phone book.
1Press the Address book key 4 times.
" The Address book key can be used if the main screen or Can Use
AddressBook is displayed.
2Press the or key to select SEARCH, and then press the Enter key.
A screen appears, allowing you to enter the text to be searched for.
3Using the keypad, enter the first few characters of the name programmed for
the desired recipient.
" Enter the name programmed in the speed dial number or the group dial
number. For details on entering text, refer to “Entering Text” on page97.
" Text up to 10 characters long can be entered.
4Press the Enter key.
The number of names beginning with the text entered in step 3 is displayed.
" If no names beginning with the entered text are found, NOT FOUND is dis-
played.